Model No.: Z-205
This meter is a non-contact, hand held, static monitoring and locating instrument. It utilises a precision LCD display to indicate the magnitude and polarity of the electrostatic charge.
The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.
The unit gives direct readings of electrostatic potentials on any surface, when held at a distance of 50 mm. However, range can be increased as explained below.
The use of very low current circuitry results in a long battery life of over 6 months under normal use. It also incorporates state-of-the-art circuitry, to enable measurements to be made for as long as 30 seconds without significant drift. In practice, measurement time is usually less than 10 seconds.
OPERATING INSTRUCTIONS ARE ALSO ON THE BACK OF THE INSTRUMENT.
It is important to note that the accuracy of measurement depends on the following points.
MAINTENANCE
MAINTENANCE: Used with care, this instrument will provide many years of trouble-free operation. Replace Battery if “Low Batt” appears on display. Please return it to the factory for any servicing/ calibration as it does not have any user serviceable parts. It can be cleaned with a soft dry cloth but never use solvents as they may damage the plastic case.
CAUTION
This is a non-contact instrument. Please do not touch the sensor plate as it may cause failure.
1. Indicating range: +10 KV at 5 cms from object
2. Resolution: LSB 10 V
3. Display: 3.5 Digit LCD display
4. Accuracy: 10% of reading for ambient RH < 65%
5. Test Actuation: Push On-Push Off Switch
6. Power Supply: 9V battery
7. Low Battery: Indication on Display at < 7.0V
8. Dimensions in mm: 125 x 75 x 29
9. Weight: 135 gms
10. Calibration: Recommended once every 12 months
11. Warranty: One year
12. Accessories: Carrying case
This data is provided for general information and material comparison. The potential user should perform tests to determine the product’s performance and suitability in the intended application. Final determination of the fitness of the product for any particular application is the responsibility of the buyer.
This meter is a non-contact, hand held, static monitoring and locating instrument. It utilises a precision LCD display to indicate the magnitude and polarity of the electrostatic charge.
The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.
The unit gives direct readings of electrostatic potentials on any surface, when held at a distance of 50 mm. However, range can be increased as explained below.
The use of very low current circuitry results in a long battery life of over 6 months under normal use. It also incorporates state-of-the-art circuitry, to enable measurements to be made for as long as 30 seconds without significant drift. In practice, measurement time is usually less than 10 seconds.
OPERATING INSTRUCTIONS ARE ALSO ON THE BACK OF THE INSTRUMENT.
It is important to note that the accuracy of measurement depends on the following points.
MAINTENANCE
MAINTENANCE: Used with care, this instrument will provide many years of trouble-free operation. Replace Battery if “Low Batt” appears on display. Please return it to the factory for any servicing/ calibration as it does not have any user serviceable parts. It can be cleaned with a soft dry cloth but never use solvents as they may damage the plastic case.
CAUTION
This is a non-contact instrument. Please do not touch the sensor plate as it may cause failure.
1. Range:
2. Range selection:
3. Indications:
4. Accuracy: +/- 10%
5. Power: 9V battery
6. Low Battery: Warning at less than 7 volts
7. Dimensions/Wt: 135 x 70 x 25 mm, 100 gms
8. Calibration: Recommended every 12 months
9. Warranty: 12 months
10. Accessories: Carry pouch, Optional Wall Station
This meter is a non-contact, hand held, static monitoring and locating instrument. It utilises a precision LCD display to indicate the magnitude and polarity of the electrostatic charge.
The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.
The unit gives direct readings of electrostatic potentials on any surface, when held at a distance of 50 mm. However, range can be increased as explained below.
The use of very low current circuitry results in a long battery life of over 6 months under normal use. It also incorporates state-of-the-art circuitry, to enable measurements to be made for as long as 30 seconds without significant drift. In practice, measurement time is usually less than 10 seconds.
OPERATING INSTRUCTIONS ARE ALSO ON THE BACK OF THE INSTRUMENT.
It is important to note that the accuracy of measurement depends on the following points.
MAINTENANCE
MAINTENANCE: Used with care, this instrument will provide many years of trouble-free operation. Replace Battery if “Low Batt” appears on display. Please return it to the factory for any servicing/ calibration as it does not have any user serviceable parts. It can be cleaned with a soft dry cloth but never use solvents as they may damage the plastic case.
CAUTION
This is a non-contact instrument. Please do not touch the sensor plate as it may cause failure.
1. Indicating range: +10 KV at 5 cms from object
2. Resolution: LSB 10 V
3. Display: 3.5 Digit LCD display
4. Accuracy: 10% of reading for ambient RH < 65%
5. Test Actuation: Push On-Push Off Switch
6. Power Supply: 9V battery
7. Low Battery: Indication on Display at < 7.0V
8. Dimensions in mm: 125 x 75 x 29
9. Weight: 135 gms
10. Calibration: Recommended once every 12 months
11. Warranty: One year
12. Accessories: Carrying case
ESD Control Systems is a leader in certified advanced ESD product solutions and offers safety audit services, accident investigations, learning, and Training Programs – catering to the Pharmaceutical, Chemical, Defense, and Space and Electronics industries. ESD Control Systems’ Mission is to be the Static Dissipation Solution Provider for the World
ESD Control Systems is a leader in certified advanced ESD product solutions and offers safety audit services, accident investigations, learning, and Training Programs – catering to the Pharmaceutical, Chemical, Defense, and Space and Electronics industries. ESD Control Systems’ Mission is to be the Static Dissipation Solution Provider for the World
